Quality
generating highest quality precision of cut.
Speed
producing up to 12,000 die cut pieces per hour.

Automatic
cutting cycle auto start by photocell.
Multiuse
Die cutting multiple shapes and materials.
grafcut
Label punching machine
What is it made for?
LC180 is used for die cutting of different shapes of labels, booklets, cards, stickers, note
pads, in mould labels and similar.
How it works?
In standard equipped machine the material is pushed by hydraulic piston trough steel die (the die shape varies depending on final product shape).
The machine is standard equipped with arms to
position the die against the paper as well as with safety photocell barrier.
The curtain automatically starts the stroke of machine when operator positions the material and removes hands from the machine.
The waste paper drop automatically to the bin and cut labels are pushed trough die to metal
receiver.
When having optional counterpress device the the material is placed in front of the die and when the ream is reaching the die edge it is counter pushed by pneumatic cylinder to prevent curling.
The finished product must be remove same position as it was loaded before cut. This reduces the maximum machine output.

How it works?
When do you need to use counterpress?
We recommend it for:
· product requiring highest precision of cut
· inmould labels and plastics
· for larger size product cutting
· for flexible material which can be curly
Label punching machine LC180 Technical specification :
Maximum block size | 180 x 180 mm |
Minimum block size | 20 x 20 mm* |
Maximum height of punched block | up to 150 mm** |
Maximum waste material stripe | 10 mm |
Pressure of piston | 2 800 kg |
Strokes per minute | 15 |
Power supply | 3phase, 400V,50Hz, 3 kW |
Dimensions | Standard: 2170mm x 840 mm x height 1250- 1450 mm (adjustable) with counterpress: 1750 mm x 840 mm x height 1250- 1450 mm (adjustable) |
Weight | approx. 400kg |
Noise level | 66 dB |
NOTE! | * material should be tested if smaller than 100 x 100mm to verify punching quality depending on paper type. the given parameters base on label type paper **maximum material height depends on type of material and specification of sheet |
Label punching machine LC280 Technical specification :
Maximum block size | 280 x 280 mm |
Minimum block size | 20 x 20 mm* |
Maximum height of punched block | up to 150 mm** |
Maximum waste material stripe | 10 mm |
Pressure of piston | 6 000 kg |
Strokes per minute | 15 |
Power supply | 3phase, 400V,50Hz, 3 kW |
Dimensions | Standard: 2350mm x 980 mm x height 1350- 1550 mm (adjustable) with counterpress: 1950 mm x 840 mm x height 1350- 1550 mm (adjustable) |
Weight | approx. 450 kg |
Noise level | 66 dB |
NOTE! | * material should be tested if smaller than 100 x 100mm to verify punching quality depending on paper type. the given parameters base on label type paper **maximum material height depends on type of material and specification of sheet |